Place of Origin: | CHINA |
Brand Name: | Mkfale |
Model Number: | P7 Large Diameter Pilot Operated |
Minimum Order Quantity: | 1 PC |
---|---|
Price: | Negotiation |
Packaging Details: | Plastic Bags , Boxes , Carton , Pallet Or As Customer Advice |
Delivery Time: | Negotiation |
Payment Terms: | L/C, T/T, Western Union |
Supply Ability: | 10555 / Year |
Medium: | Water , Hot Water , Air , Gas , Oil Etc | Type: | Normally Closed |
---|---|---|---|
Temperature: | 0 ~ 65 ℃ | Connection: | Thread , Flange ( DN 25 - 100 ) |
Action: | Pilot Operated | Body: | Stainless Steel 304 / 316 |
Pressure: | 0 . 5 ~ 16 Kgf / Cm ² | Port Size: | 3 / 8 " ,1 / 2 " ,3 / 4 " ,1 " ,1 1 / 4 " ,1 1 / 2 " ,2 " |
High Light: | two way solenoid valve,miniature high pressure solenoid valve |
P7 Two Way Water Solenoid Valve With 304 / 316 Stainless Steel Material Body
Applicability
1 . Solenoid valve allowed the liquid viscosity , generally under 20 CST , more than 20 CST shall be indicated .
2 . If fluid is not high cleanliness , should be installed a filters in front of the solenoid valve , general solenoid valve is better claim to medium cleanness
3 . Pay attention to the orifice and port size ; usually only open and close two type ; Conditions permit , please install bypass pipe , easy maintenance ; When there is water drain to customize solenoid valve opening and closing time regulation .
4 . Pay attention to the environmental temperature on the influence of solenoid valve .
5 . Power supply current and power consumption should be selected according to the output capacity , power supply voltage generally allow + / - 10 % , must pay attention to AC starting the VA value is higher .
Reliability
Solenoid valve is divided into normally closed and normally open . General choose normally close , power on is open and power off is shut down ; But in the open for a long time and very short close time to choose the normally open type .
Security
1.General solenoid valve is not waterproof , when needs waterproof model , we can be customized .
2.Nominal pressure solenoid valve of the highest calibration must be more than the highest pressure in the pipeline , otherwise life will shorten or other unexpected circumstances .
3.Corrosive liquid should be chosen in all stainless steel type , appropriate chooses the corrosive fluid plastic king ( LF ) solenoid valve .
Economy
There are a lot of solenoid valve can be common use , but on the basis of can satisfy the above three terms , should choose the most economical products
Details
1: 2 Way normally closed solenoid valve , Closed when de - energized , open when energized .
2: Body material: 316 stainless steel
3: Max. Allowable pressure 20kgf / cm ² ; Ambient Temp . 0 ℃ ~ 65 ℃
4: Serialized products , small in size , large flow rate , widely use
5: Flow as the arrow , mounts in any position ; Best position is Solenoid Vertical and upright direction .
6: Voltage : 220VAC / 230VAC / 240VAC / 110VAC / 24VAC 50 / 60HZ 24VDC / 12VDC
7: Coil can fix Germany Nass Coil , for Orifice under DN25 only
8: This series valves are offered NBR , VITON , EPDM etc for Seals and diaphragm to provide on -off control of various fluids.
Why choose us
1: Reliable quality assured and active after-sell service
2: 12-18month quality guarantee
FAQ
Q: What is the price of the product ?
A: Our prices are based on the size and type of material , if you can give me the information ,
then we can give you an estimated price is for reference only . We can do any size and any desgin .
Q: How much is our minimum order quantity ?
A: Our minimun quantity is 1 Piece .
Q: Could you offer the free samples ?
A: Yeah, we could offer the free samples based on special customer.pre-production sample,production sample.
Q: What types of service ?
A: Supply technical information for your Working condition and give advise about details.